• 11111
  • 首页
  • 期刊介绍
  • 编委会
  • 征稿启事
  • 期刊订阅
  • 相关下载
  • Email alert
  • 联系我们
引用本文:刘凯,王芳,王选仓.水泥混凝土导热性能影响因素及预估模型研究[J].建筑材料学报,2012,(6):771-777
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1208次   下载 0 本文二维码信息
码上扫一扫!
分享到: 微信 更多
水泥混凝土导热性能影响因素及预估模型研究
刘凯1, 王芳2, 王选仓3
1.合肥工业大学土木与水利工程学院,安徽合肥230009;2.安徽建筑工业学院土木工程学院,安徽合肥230601;3.长安大学公路学院,陕西西安710064
摘要:
为提高融冰雪效率,研究具有良好导热性能的混凝土铺面材料,通过试验得出了普通、钢纤维、碳纤维混凝土的配合比,采用热传导仪测定了它们的导热系数λ.系统研究了骨料体积分数、砂率、水灰比、温度、纤维种类和掺量对混凝土导热系数的影响规律,并基于广义灰关联法对各因素进行排序,依据测试结果和影响规律建立了以上3类混凝土导热系数预估模型.结果表明:钢纤维混凝土最适宜作为融冰雪路面材料;纤维种类和掺量对混凝土导热性能起主导作用,骨料体积分数、温度和水灰比的影响次之,砂率的影响最小.
关键词:  道路工程  预估模型  热传导试验  导热系数  水泥混凝土
DOI:10.3969/j.issn.1007 9629.2012.06.008
分类号:
基金项目:国家自然科学基金资助项目(51108150);中国博士后科学基金特别资助项目(2012T50539);中国博士后科学基金面上项目(2011M501377);中央高校基本科研业务费专项资金资助(2011HGQC1017)
Influence Factor of Thermal Conductivity of Cement Concrete and ItsPrediction Model
LIU Kai1, WANG Fang2, WANG Xuan cang3
1.School of Civil and Hydraulic Engineering, Hefei University of Technology, Hefei 230009, China;2.School of Civil Engineering, Anhui University of Architecture, Hefei 230601, China;3.Highway School, Changan University, Xian 710064, China
Abstract:
In order to improve the efficiency of snow melting and deicing, pavement concrete material that possesses good thermal conductivity was studied. Concrete mixture of common concrete, steel fiber concrete and carbon fiber concrete were obtained through laboratory testing. Thermal conductivity of these concrete was measured by thermal conductivity detector. The influence of factors on thermal conductivity, namely, aggregate volume content, sand percentage, water cement ratio, temperature, fiber type and content were investigated. Various factors were sorted based on generalized gray correlation method. Prediction model of thermal conductivity of three kinds of concrete were established according to the test results and the influence. The results show that steel fiber concrete is strongly recommended as melting snow and deicing pavement material. Fiber type and content plays dominant role on thermal conductivity. The influence of aggregate volume content, temperature and water cement ratio is greater than the sand percentage.
Key words:  road engineering  prediction model  thermal conductivity test  thermal conductivity  cement concrete