考虑膨胀剂PEC柱的黏结滑移性能
作者:
作者单位:

1.内蒙古科技大学 土木工程学院,内蒙古 包头 014010;2.内蒙古自治区高校智能建造与 运维工程研究中心,内蒙古 包头 014010;3.中恒丰建筑集团有限公司, 北京 102627;4.诺丁汉大学 土木工程系,英国 诺丁汉 NG72RD

作者简介:

曹芙波(1976—),男,湖南衡阳人,内蒙古科技大学教授,硕士生导师,博士. E-mail: caofubo@139.com

通讯作者:

王晨霞(1977—),女,内蒙古集宁人,内蒙古科技大学副教授,硕士生导师,博士. E-mail: 14755826@qq.com

中图分类号:

TU398

基金项目:

国家自然科学基金资助项目(51868061);内蒙古自治区自然科学基金资助项目(2020MS05071, 2022LHMS05011)


Bond Slip Performance of PEC Column Considering Expansion Agent
Author:
Affiliation:

1.School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China;2.Intelligent Construction and Operation Engineering Research Center at Universities of Inner Mongolia Autonomous Region, Baotou 014010 , China;3.Zhonghengfeng Construction Group Co., Ltd., Beijing 102627, China;4.Department of Civil Engineering, University of Nottingham, Nottingham NG72RD, UK

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为探究部分包裹混凝土(PEC)柱在膨胀剂作用下的黏结滑移性能,设计了6组试件进行短柱推出试验,探究了混凝土强度、黏结长度和膨胀剂掺量对H形钢与混凝土之间黏结性能的影响,分析了黏结应力的组成,建立了反映黏结滑移性能的数值模型.结果表明:H形钢和混凝土之间的黏结性能与混凝土强度、黏结长度以及膨胀剂掺量呈正相关;H形钢与混凝土之间黏结应力的81.6%由摩擦应力提供,考虑黏结长度的摩擦应力与化学胶结力的比值稳定在42%~47%;依据试验建立的折线式黏结滑移本构模型可以较好地反映黏结应力与位移的关系,采用非线性弹簧建立的有限元模型与试验结果吻合较好.

    Abstract:

    Work on the bond-slip performance of partially encased concrete (PEC) under the action of expansion agent was carried out. Six groups of specimens were designed to carry out short column push-out test. The effects of concrete strength, bond length and expansion agent content on the interface bonding performance between H-shaped steel and concrete were investigated. The composition of bond stress was analyzed, and the numerical model reflecting the bond-slip performance was established. The results show that the improvement of bonding performance is positively correlated with concrete strength, bonding length and expansion agent content. 81.6% of the bond stress between H-shaped steel and concrete is provided by friction stress, and the ratio of friction stress to chemical bond force considering bond length is stable at 42%-47%. The broken-line bond-slip constitutive model established according to the test can better reflect the relationship between bond stress and displacement. The finite element model established by nonlinear spring is well fitted with the test results.

    参考文献
    相似文献
    引证文献
引用本文

曹芙波,谢庆,李涛,汪方莹,王晨霞.考虑膨胀剂PEC柱的黏结滑移性能[J].建筑材料学报,2022,25(11):1177-1184

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-05-03
  • 最后修改日期:2022-07-22
  • 录用日期:
  • 在线发布日期: 2022-11-30
  • 出版日期: