预应力平行钢丝束高温力学性能
作者:
基金项目:

土木工程防灾国家重点实验室开放基金资助项目(SLDRCE14 05);国家自然科学基金资助项目(51878348)


Mechanical Properties of High Tensile Parallel Wire Cables at Elevated Temperatures
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • | |
  • 文章评论
    摘要:

    采用非接触式应变视频测量(CCDC)系统,对抗拉强度为1670MPa的7根×7mm平行钢丝束进行高温力学性能试验.基于试验得到的平行钢丝束高温应力应变全曲线,研究了平行钢丝束比例极限、弹性模量、名义屈服强度、断裂强度的高温折减系数以及高温应力应变关系.结果表明:平行钢丝束高温下应力应变全过程具有显著的应力强化阶段和颈缩阶段,2.00%应变下的高温名义屈服强度适用于平行钢丝束.

    Abstract:

    A charge coupled device camera(CCDC) system was used to capture the full range of stress strain relationship of high tensile strength parallel wire cables by 7 wires with 7 mm diameter with tensile strength of 1670MPa at different elevated temperature. Based on the high temperature test database, a series of reduction factors on proportional limit, elastic modules, nominal yield strength, rupture strength and functions of stress strain relationship at elevated temperature was obtained. The test results indicate that the stress strengthening stage and necking stage are clarified by the full range of stress strain relationship of high tensile strength parallel wire cables at elevated temperature, and the nominal yield strength under 2.00% strain applys to the high tensile strength parallel wire cables.

    参考文献
    相似文献
    引证文献
引用本文

杜咏,肖丽萍,李国强,汪贤聪.预应力平行钢丝束高温力学性能[J].建筑材料学报,2020,23(1):114-121

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-09-22
  • 最后修改日期:2018-11-21
  • 在线发布日期: 2020-03-10
文章二维码