酰胺类聚羧酸系减水剂的合成工艺及性能研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51178339);国家重点基础研究发展计划(973计划)项目(2009CB6231045)


Study on Synthesis Technique and Properties of Amide Type Polycarboxylate Based Superplasticizer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    探讨了酰胺类聚羧酸系减水剂的合成工艺,设计采用聚醚胺(PN220)和聚丙烯酸(PAA)为共聚单体,直接聚合制得减水剂.通过试验,就PAA的相对分子质量、单体比例、聚合温度和时间对砂浆减水率、流动度保持性的影响规律进行了分析.在此基础上设计正交试验,得到最佳合成工艺.就采用最佳工艺所合成的产品,与当前普遍生产使用的以聚乙二醇单甲醚(MPEG)和甲基丙烯酸(MAA)为单体合成的产品进行性能对比,结果表明前者是一种保坍性能优异的聚羧酸系减水剂,适用于坍落度保持性要求很高的混凝土.

    Abstract:

    Synthetic process of amide type polycarboxylate based superplasticizer was studied. Polyether amine(PN220) and polyacrylic acid(PAA) were used as the monomers and directly polymerized into superplasticizer. The effects of the relative molecular mass of PAA, monomer ratio, polymerization temperature and time on waterreducing rate and fluidity retention of the product were investigated through experiments. The orthogonal experiment is designed to find out the optimal synthesis technique. The performance of the product is compared with the superplasticizer which is prevailing in the market and synthesized by polyethylene glycol monomethyl ether(MPEG) and methacrylic acid. The results show that the former has excellent slump retention and it is suitable for preparation of concrete demanding outstanding slump retention.

    参考文献
    相似文献
    引证文献
引用本文

孙振平,罗琼.酰胺类聚羧酸系减水剂的合成工艺及性能研究[J].建筑材料学报,2012,(1):22-27

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-10-27
  • 最后修改日期:2010-11-09
  • 录用日期:
  • 在线发布日期: 2012-04-10
  • 出版日期: