抹面抗裂砂浆的优化设计
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU502

基金项目:

江苏省高校自然科学基金


Design Optimization of Base Coat Mortar
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对普通抹面砂浆受冷热环境交替作用容易开裂的问题,研制了高柔性的抹面抗裂砂浆.通过正交试验,研究了橡胶粉、聚合物胶粉和聚丙烯纤维掺量对砂浆抗压强度、抗折强度、压折比、收缩率和弹性模量的影响.结果表明,橡胶粉、聚合物胶粉、聚丙烯纤维的加入使砂浆的弹性模量降低,柔韧性增加,抗裂性提高,另外,确定了柔性抹面砂浆的最佳配合比.

    Abstract:

    Aiming at solving crack problem of common base coat mortar in different temperature,flexible mortar was developed,the influence of rubber powder,polymer powder and polypropylene fiber on compressive strength,split strength and elastic modulus were researched.The results show that this material can bring down the elastic modulus,the ability of resistance to deformation is improved,optimal mixing proportion of flexible base coat mortar is proposed.

    参考文献
    相似文献
    引证文献
引用本文

张志军,曹露春.抹面抗裂砂浆的优化设计[J].建筑材料学报,2008,(5):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: