抛填集料工艺对混凝土力学性能的影响
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU528

基金项目:


Effect of Scattering-Filling Aggregate Technology on the Mechanical Properties of Concrete
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用抛填集料工艺制备了一种粗集料能充分接触并有效嵌锁的混凝土,从而使集料能在混凝土中充分发挥强度骨架的作用.采用这种方法制备集料嵌锁混凝土不仅保证了原混凝土的良好工作性,而且抛入碎石后混凝土的强度不但没有降低,反而随着集料对混凝土的置换率从10%~30%(体积分数)的增加而有一定增加.粗集料在这种混凝土中有很高的体积分数.SEM观察表明:抛填集料与水泥石的界面粘结比普通混凝土中的集料/水泥石界面粘结要紧密.

    Abstract:

    A new type of coarse aggregate interlocking concrete was prepared with a new method called scattering-filling aggregate technology.In this type of coarse aggregate interlocking concrete,the coarse aggregates contacted with each other firmly and played a role of strength framework.The strength of the coarse aggregate interlocking concretes increases as the aggregates were drop-filled in the plastic concrete,furthermore the strength of them increased with the replacement ratio increasing from 10% to 30%(by volume).The volume fraction of coarse aggregate in this concrete is much higher than that in the ordinary one.The SEM photograph indicated that interface transition zone of the interlocking aggregate was much tighter than that of the ordinary aggregate in plastic concrete.

    参考文献
    相似文献
    引证文献
引用本文

沈卫国.抛填集料工艺对混凝土力学性能的影响[J].建筑材料学报,2007,(6):711-716

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2007-01-31
  • 最后修改日期:2007-04-26
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码