• 11111
  • 首页
  • 期刊介绍
  • 编委会
  • 征稿启事
  • 期刊订阅
  • 相关下载
  • Email alert
  • 联系我们
引用本文:张文贵,沈卫国,刘超,王亚楠,吴鹏.正混凝土的Mini-Mason法制备及其性能研究[J].建筑材料学报,2023,26(9):980-987
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 153次   下载 579 本文二维码信息
码上扫一扫!
分享到: 微信 更多
正混凝土的Mini-Mason法制备及其性能研究
张文贵1,2,沈卫国1,2,3,4,刘超1,2,王亚楠1,2,吴鹏4
1.武汉理工大学 材料科学与工程学院,湖北 武汉 430070;2.武汉理工大学 硅酸盐建筑材料国家重点实验室,湖北 武汉 430070;3.武汉理工大学-加州大学伯克利混凝土科学与技术联合实验室, 湖北 武汉 430070;4.大宗固废综合利用与绿色建材襄阳市重点实验室,湖北 襄阳 441100
摘要:
采用Mini-Mason法制备了一种高粗骨料体积分数的骨料嵌锁良好的正混凝土.结果表明:通过提高填充砂浆的流动性,能有效提升混凝土中粗骨料的体积分数至52%,并明显改善混凝土的力学性能、体积稳定性、传质性能和界面过渡区的结构,优化浆体与粗骨料的黏结状态,大幅度降低胶凝材料的用量.试验证明了Mini-Mason工艺的可行性,并为3D打印正混凝土提供了一种新的技术优势.
关键词:  抛填骨料  粗骨料体积分数  骨料嵌锁  正混凝土  界面过渡区
DOI:10.3969/j.issn.1007-9629.2023.09.005
分类号:TU528.56
基金项目:国家自然科学基金资助项目(51972247)
Preparation and Properties of Orthoconcrete by Mini-Mason Method
ZHANG Wengui1,2, SHEN Weiguo1,2,3,4, LIU Chao1,2, WANG Yanan1,2, WU Peng4
1.School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Silicate Materials for Architecture, Wuhan University of Technology, Wuhan 430070,China;3.WUT-UC Berkeley Joint Laboratory on Concrete Science and Technology, Wuhan 430070,China;4.Xiangyang Key Laboratory of Comprehensive Utilization of Bulk Solid Waste and Green Building Materials, Xiangyang 441100,China
Abstract:
A orthoconcrete with high coarse aggregate volume fraction and good aggregate interlock was prepared by Mini-Mason method. The results show that by improving the fluidity of the filling mortar, the volume fraction of coarse aggregate in concrete can be effectively increased to 52%, and the mechanical properties, volume stability, mass transfer performance and interfacial transition zone structure of concrete can be significantly improved, and the bonding state between slurry and coarse aggregate can be optimized, and the use amount of cementing material can be greatly reduced. The experiment proves the feasibility of the Mini-Mason process and provides a new technical advantage for 3D printing orthoconcrete.
Key words:  scattering-filling aggregate  volume fraction of coarse aggregate  aggregate interlock  orthoconcrete  interfacial transition zone