• 首页
  • 期刊介绍
  • 编委会
  • 征稿启事
  • 期刊订阅
  • 相关下载
  • 联系我们
混凝土剪切多轴加载试验技术研究与验证
Research and Verification of Concrete Shear Multiaxial Loading Test Technology
投稿时间:2018-11-25  修订日期:2018-12-25
DOI:103969/j.issn1007 9629202002032
中文关键词:  混凝土  剪切多轴  试验技术  数据验证
英文关键词:concrete  shear multiaxial  test technology  data validation
基金项目:国家重点研发计划项目(2016YFC0401704);国家自然科学基金重点项目(51539006)
              
作者单位
余振鹏
YU Zhenpeng
上海大学土木工程系,上海200444
Department of Civil Engineering, Shanghai University, Shanghai 200444, China
黄侨
HUANG Qiao
东南大学交通学院,江苏南京211102
School of Transportation, Southeast University, Nanjing 211102, China
李富荣
LI Furong
盐城工学院土木工程学院,江苏盐城221051
College of Civil Engineering, Yancheng Institute of Technology, Yancheng 221051, China
谢兴华
XIE Xinghua
南京水利科学研究院水工水力学研究所,江苏南京210029
Hydraulic Engineering Department, Nanjing Hydraulic Research Institute, Nanjing 210029, China
屈辉
QU Hui
西安力创材料检测技术有限公司,陕西西安710068
Xian Letry Testing Machine Co., Ltd., Xian 710068, China
摘要点击次数: 49
全文下载次数: 0
中文摘要:
      对目前混凝土剪切加载传统试验技术进行论述和分析,探究其存在的不足及原因,由此设计出一种新型混凝土剪切多轴加载试验技术与设备,并通过试验验证了其优势和可行性.结果表明:混凝土剪切加载传统试验技术存在一定的弯曲效应、旋转效应和摩擦效应,最终导致不同试验技术得到的剪切强度结果相差2~3倍.通过改进试验技术、设计相应设备和试件尺寸,降低了弯曲效应、旋转效应和摩擦效应对混凝土剪切多轴加载试验结果的影响.应用本文设计的混凝土剪切多轴加载试验技术所得数据,验证了新试验技术具有一定的可行性,同时得到了混凝土剪切荷载位移全曲线,为混凝土剪切多轴力学性能研究提供了良好的试验技术.
英文摘要:
      The traditional test technology of concrete shear loading was discussed and analyzed to explore its shortcomings and causes. And a new test technology and equipment of concrete shear multiaxial loading was designed, and its advantages and feasibility through the test were verified. The results show that there are bending effect, rotation effect and friction effect in the traditional test technology of concrete shear loading, which leads to the difference of shear strength results obtained by different test technologies by 23 times. The influence of bending effect, rotation effect and friction effect on the test results of concrete shear multiaxial loading is reduced by improving the test technology and designing the corresponding equipment and specimen size. The test data obtained by the equipment of this paper verify the feasibility of the new test technology. At the same time, the shear load displacement full curve of concrete is obtained, which provides a good test technology for measurement of the mechanical properties of concrete.
查看全文  查看/发表评论  下载PDF阅读器
关闭