| 摘要: |
| 通过单轴压缩试验以及侧压恒定和侧向位移恒定的2类真三轴压缩试验，研究了塑性混凝土峰值后变形特征.结果表明：塑性混凝土峰值后变形特征与试验的侧限条件密切相关.塑性混凝土在单轴受压情况下，峰值后变形呈现软化特征；在侧压恒定的真三轴压缩试验下，峰值后变形呈现理想塑化或近似塑化特征，试件的破坏主要表现为双向剪切破坏，且破坏方向与最小主应力方向一致；在侧向位移恒定的真三轴压缩试验下，峰值后变形呈现硬化特征，试件的破坏主要表现为轴向过大的压缩变形.当变形参数D2＞0时，峰值后变形表现为硬化；当-01≤D2＜0时，峰值后变形表现为理想塑化或近似塑化；当D2＜-01时，峰值后变形表现为软化. |
| 关键词: 塑性混凝土 峰值后变形 多轴应力 变形参数 |
| DOI：103969/j.issn1007 9629201404017 |
| 分类号: |
| 基金项目:国家自然科学基金资助项目（51109082）；河南省基础与前沿技术研究计划（142300413216）；河南省高等学校青年骨干教师计划资助项目（2013GGJS 083）；华北水利水电学院高层次人才科研启动项目（2011A003）；水利部公益性资助项目（201301034） |
|
| Post Peak Deformation Characteristics of Plastic Concrete under Multiaxial Stress State |
|
WANG Siwei1, WANG Zhongfu1, PAN Xuwei1, GAO Danying2
|
|
1.Institute of Geotechnical Engineering and Hydraulic Structure Engineering, North China University of WaterConservancy and Hydroelectric Power, Zhengzhou 450045, China;2.School of Civil Engineering, Zhengzhou University, Zhengzhou 450002, China
|
| Abstract: |
| Post peak deformation characteristics of plastic concrete were studied using uniaxial and true triaxial compression tests. The results show that post peak deformation characteristics are greatly influenced by confining conditions. Post peak deformation of plastic concrete becomes softened under uniaxial stress state. It will be ideally plastic or approximately plastic under true triaxial stress state with constant confining pressure, and hardened under true triaxial compression state with constant lateral displacement. The parameter of D2 can distinguish post peak deformation characteristics of plastic concrete. Post peak deformation will be hardened when D2 is positive, and ideally plastic or approximately plastic when D2 is from -01 to 0，and softened when D2 is less than -01. |
| Key words: plastic concrete post peak deformation multiaxial stress deformation parameter |
